System restoration ARM926EJ-S 248Mhz

Hello all.
I have
Version:1.90
Hardware Version:3.0
CPU: ARM 926EJ-S 248MHz
Release SV125
RAM: 128M
Video decode:1
color: black
RAM: 128 MB
Flash: 2GB
OS: WIN CE 5.0

I went into the bios
I got the following Screen Message:
System upgrade:
1.Format Nand disk
2.Format XIP disk
3.Format Flash2 disk
4.Update XIP
5.Update Eboot
ESC.Exit
I pressed 1, 2, and 3. Then reboot.
Now download picture windows ce and the end.

What can I do to restore or instal new system?
Please write detailed steps, about I got confused in the forum.

I have 2 netbook AK7802. I had problem with with 2 netbook ARM926EJ-S 248Mhz, when I switched ON, netbook stop working on screen "System Initializing", I try copy ARM926EJ-S Software to SD card but netbook don't see it.So I try trick from [You must be registered and logged in to see this link.] I copy xip.nb0 EBOOT.nb0 and nboot128.bin.and now my first netbook don't turn ON!

Congratulations! You have formatted your netbook. Now it is clean as a white paper =)

Now you need to find your v1.90 Firmware, Burntool and recover ROM.

Where to find mine v1.90 Firmware and how recover ROM?

1
Download V1.90 Firmware, this seems to be working

2
See Helpful instruction for Recovery, works for our models too.


3
Don't touch that buttons again =)

4
Look for any news here - [You must be registered and logged in to see this link.]

did you format first.
try formating and load it

I will try today.

hello. i have a netbook 7" - Windows CE.That has windows CE 5.0 and i want to install Linux or android how to do that?I have tried with an SD and usb but nothing happens.I have use burn tool to flash it and works only with Ce...
This is the start up screen :

version:1.90
hardware version:3.0
CPU: ARM 926EJ-S
Release SV122
RAM:128M
video decode :1
press F1 key to update system.

if i press F1 ask me the key which is ztk and after show me

System upgrade:
1.Format Nand disk
2.Format xip disk
3.Format Flash2 disk
4.Update XIP
5.Update Eboot
6.Reboot
ESC.Exit

Waiting for press key

what i have to do to success that?
i appreciate you for your help and please give me your best advice.

There are no linux or android for this CPU.

The Link is down please can anybody give me a working one ? Got an Allfine PC703 form a Friend, it stucks on the system initializing screen...

thanks a lot

Link is now fixed

Not here it isn't.

Thanks a lot, now i was able get my Netbook back to working. But Windows in now complete in english. Any chance bringing back german language ?


regards

No chance, there is no German ROM available.

:/ Thanks anyway

pr3ston wrote:Thanks a lot, now i was able get my Netbook back to working. But Windows in now complete in english. Any chance bringing back german language ?

You needed the German xip.nb0 or german MUI

any ideas, where i can get it ? Can't find anything. :/ At least i'm happy, that i found the english one here in this forum. :/


Can i dump the german one from another netbook, somehow?

Download v1.90 and open file instead of save and it will download Once its complete extract it to the c: drive and follow directions to the letter Worked for me and now runs better that when I first got it Took a couple of tries but now it's like new

Thanks

[You must be registered and logged in to see this link.]

You can get the driver for windows 7 on the v1.90 download in folder M3_USBDriver

The only option would be to figure out how to dump the ROM from working machines. The ROM is somehow protected and ROM dump utilities dumps garbage and not real data. I tried to hack the burntool for dumping but still no success.

hy i have got epc -702 laptop wirh anyka 7802
hot to connet laptop to pc ?
with simple usb usb cable

Do you want to restore it or just make a connection to PC?

My laptop is broken j just turn on and i see windows ce booting and not runnin
And i saw one instruction where i dont connet laptop with deskpc
i have usb usb cable dont use
i intall usb lyzer it is wrong plss help

You need straight USB cable and read the PDF on link above about restoration. Install USB driver and then run burntool.

Where the pdf? Link pls
And ehat usb driver?
my netbook not ready is not problem?

See this post: [You must be registered and logged in to see this link.]