ARM926ej-s 266MHz bricked

hi
i burned v1.90 rom onto my device(motherboard UMPC701-main-A3.1, but labelled UMPC7800 under the battery) (processor:Anyka AK7802PQ21605, arm920-atkchip 64MB RAM, ARM926ej-s 266MHz) and i bricked it.
it's not booting at all now
please please help thanx

driversat wrote:hi
i burned v1.90 rom onto my device (arm920-atkchip 64MB RAM,ARM926ej-s 266MHz) and i bricked it.
it's not booting at all now
please please help thanx

Sounds like we have a similar device. The burn worked fine for me, so I have a few questions for you:

First, did burntool finish successfully?
Second, are you sure you specified all the correct binaries in the proper places in the burntool dialog window? (i.e. PRODUCER.nb0, nandBoot,eBoot, xbo.nbo).
Lastly, which link did you use to get the v1.90 binaries? I can compare against mine. You may just need to burn again or try a different version (e.g. v1.86).

Be sure that RAM is set to DDR and do a factory restore.

otoluk wrote:Be sure that RAM is set to DDR and do a factory restore.

hey and thanks for your interest,
well, this unit doesn't have a name, it'a a chinese one
i did everything described in the tutoriel at cnmlifestyle.com and i got the rom from [You must be registered and logged in to see this link.]
i tried many roms: 1.63/1.82/1.86 none seems to work even if the burntool completes the installation successfully.

I mean read this topic and links: [You must be registered and logged in to see this link.]

otoluk wrote:I mean read this topic and links: [You must be registered and logged in to see this link.]

already done several times
no luck

If you still interested, try 1.87 ROM: [You must be registered and logged in to see this link.]

otoluk wrote:If you still interested, try 1.87 ROM: [You must be registered and logged in to see this link.]

hey, thanks for your reply
my unit is still dead.
tried 1.87 rom : no luck

hey folks,
any new progress?
my unit is still dead
plz help