open mini netbook
Would you like to react to this message? Create an account in a few clicks or log in to continue.
open mini netbook

open project of mini netbook, 7'' ARM netbook


You are not connected. Please login or register

open mini netbook » anyka mini netbooks » WINCE » WINCE 5.0 » USB-A male to male cable

USB-A male to male cable

2 posters

Go down  Message [Page 1 of 1]

1USB-A male to male cable Empty USB-A male to male cable Tue 27 Oct 2015 - 23:31

jamesjim123



Is this the correct wiring for a usb A male to male cable?I need to flash (with Burntool) V-net VL760..with arm926ej-s..I made the cable but the v-net wont find in the flash program. I found this on a website.

"You need a straight USB A male - USB A male , pins 1-1 , 2-2 , 3-4 , 4-4."

I do have a schematic to visualize but I cant upload it I dont know how..sorry



version:1.90
hardware version:3.0
CPU: ARM 926EJ-S
Release SV122
RAM:128M
video decode :1
press F1 key to update system.



Last edited by jamesjim123 on Tue 27 Oct 2015 - 23:36; edited 1 time in total (Reason for editing : couldnt open the pics)

2USB-A male to male cable Empty Re: USB-A male to male cable Wed 28 Oct 2015 - 6:41

Oto


Master
Master

Yes it is correct you need to create straight USB cable or use the Printer USB Cable and an adapter to USB A.

These cable should work - https://mininetbooks.forumotion.com/t94-which-cable-is-needed-for-flashing

Also use back USB ports not the front USB. What Windows version you have?

Back to top  Message [Page 1 of 1]

open mini netbook » anyka mini netbooks » WINCE » WINCE 5.0 » USB-A male to male cable

Permissions in this forum:
You cannot reply to topics in this forum