arm926ej version1.90 nand formatted

sir i didnt understand any thing because no knwoledge please explain me in steps
like first what accories need for process next stepwise please you r my only hope

is any usefull like
Version 1.27 (26MB)
Version 1.63 (32MB)
Version 1.82 (27MB)
Version 1.86 (26MB)
from [You must be registered and logged in to see this link.]
please help meeeee pleaseeeeeee

Hello softdurga.

what`s your problem?

After this , we can try to help you.

Best regards

thnkoyu sir

i buy this from ebay and . due to my ignorence i press formatte on all drives on my computer now its showing only loading image . disabled pendrive installation lan installation wifi installation on starting it shows arm926ej version and peress f to updte after that directly comes loading please wait i didnt under stant what to do just using reset button to switch off .after studying some forums press f1 and after that there is some options formatted xip drive storage drive and unable to formatte nao notnd drive and update xip and update nand also not working what is my solution . will it work again .........plese healp me

Ok.

You have seen from [You must be registered and logged in to see this link.]

1.- Do you remember what was the versión off your netbook?

If not; We will need to test all versions to find what will work in your netbook.

2.- We will think that your nebook uses version 1.86.

Then Download the compressed file and you can see how to repair in [You must be registered and logged in to see this link.] "Download" page.

Do you have trobles with some particular point?

Best regards

version1.90 not1.86 still is it work?

Well . Version 1.90 is not for CNMBook.


I made some "test" with my cnmBOOK
Is versión 1.63 and I tried to install versions 1.82 , 1.86 and 1.90 and it doesn`t work

What`s your netbook brand?. Is a CnmBook or oteher... If other ... please tell the name.

Best regards

scordoba, where you have found v1.90 firmware?
Who is manufacturer of notebooks with v1.90? I have bought noname notebook with ak7802 and can`t find firmware for it. Did you tried to mix firmwares, take xip from 1.86 or 1.90 and bootblock from your 1.63 version?

I tried some mix. (Not all posible ones) but it didnt work.

If some of the work for you ,pplease share it...

I don't remember where it was. But I'll put it in megaupload...

This is the link. "h ttp ://www.megaupload .com/?d=7DF3VZ0X" (please take out spaces to work)

Best regards

scordoba wrote:
This is the link. [You must be registered and logged in to see this link.]

Great, I hope this will work for my Allfine PC703, too.
I have "bricked" it last week...

how to use firm ware 1.90 ...please explain procedure

did we use any foreceps is apt

Please softdurga.

Tell us your netbook`s manufacturer and wewill help you.

If it is CnmBook, Then you can use the program Burntool.exe otherwise it will not work.

Other manufacturers have other systems...
Best regards

softdurga, try to see the readme file.
scordoba, thank you very much for this firmware!

exellent mindblowing work thankyou friends i got it back this megaupload link but key pad not working

windows 7 is not correct naa

thank you scordoba.....thankyou so much can u inform how vob files played any codacs or players

any softwares worked on it

Unfortunately allways when I connect the USB port of the netbook to the USB port of the PC with the burntool, the netbook tries to start and the burntool is unable to connect. Yes, I have short circuited the jumper for the firmware download according to the readme.
Has somebody an idea?
Best regards, harmaf

thanks softdurga reat link worked fine for me
but it wont reboot.
can any one help

hi im new to all this i installed 1.90v on my net book
it all works fine untit i shut down then it will not boot again i have to
install 1.90 every ime i shut down can anybody help please

it only works on xp,

structed while playing AVi, mp4 can any one help me how to install kodaces

im using xp can you help please


thanks dave

harmaf on burntool check ddr not sdram
good luck

dave wrote:harmaf on burntool check ddr not sdram
good luck

Unfortunately it boots up as soon as I connect the usb cable, even though I am shorting the indicated jumper. I think I will send it back to the shop where I have bought it.
Thank you,
Harald