STARTUP PROBLEMS

hi im dave new to this site and find it very helpfull
my netbook locked up so i installed 1.90v.
with the help of you guys.
everthing works perfect. but when ishut down it will not reboot.i have to install 1.90 every time i want to switch it on can you help please

thanks dave :shock

Same problem for me. At first it locked on "LAN initializing" and after 5-10 reset attempts it worked till next reboot. Now after 1.90 reinstall it works at first start and after restart do not get past startup "system initializing".

Chkeck if you flash for the right processor ARM 926 . IF so , it seems you need to reflash with factory mode. see radio buttons from post [You must be registered and logged in to see this link.] . I'm not sure but, I think with 'factory' at reflashing the burner will install all 'as new' (I mean eboot , producer, nboot and xip), on other buttons the flashing is just partial. Let me know if is ok that way. I did that an worked for me. (Anika 1.90)

Thanks, seems that factory reflash helped. Problem was with wifi if it was left enabled.

edit:still after reflash time to time got
"Lan initializing" problem. Added these
registry settings for now solved the problem

1. solution
Edit:run ndisconfig command and see if you can rebind the adapter. And see if all registry keys are correct and there is linkage between rt2870 and rt28701

2. solution
[ H K E Y _ L O C A L _ M A C H I N E \ C o m m \ R T 2 8 7 01 ]
" D i s p l a y N a m e " = " R T 2 8 7 0 b / g / n W i r e l e s s L A N D r i v e r "
" G r o u p " = " N D I S "
" I m a g e P a t h " = " R T 2 8 7 0 . d l l "
[ H K E Y _ L O C A L _ M A C H I N E \ C o m m \ R T 2 8 7 0 \ L i n k a g e ]
" R o u t e " = m u l t i _ s z : " R T 2 8 7 0 1 " , " "