Kernel Patches for AK - straight from China!

Doing some more googling, came across this:
groups DOT google DOT com/group/szlug/browse_thread/thread/f8a6f4f4cb579479

After decompressing, I found that the patches refer to AK8802,
not AK7802 that is in the Google Groups thread title.

This may be as good a point as any for reverse engineering this SoC...

TTFN,
Tarkin

arch/arm/mach-ak880x/include/mach/map.h

Code:

#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H

#include <plat/map.h>
#include <plat/map-base.h>
#include <mach/map.h>

#define AK880X_ADDR(x)    ANYKA_ADDR(x)

#define AK880X_VA_SYS  ANYKA_VA_SYS
#define AK880X_PA_SYS  (0x08000000)
#define AK880X_SZ_SYS    SZ_64K

#define AK880X_SYS_ADDR(x)  (AK880X_VA_SYS+(x))

#define AK880X_RESET_CLK  AK880X_SYS_ADDR(0x0c)
#define AK880X_VA_IRQ  AK880X_SYS_ADDR(0x34)
#define AK880X_VA_GPIO    AK880X_SYS_ADDR(0x7c)

#define AK880X_VA_DEV  ANYKA_VA_DEV
#define AK880X_PA_DEV  (0x20020000)
#define AK880X_SZ_DEV  SZ_64K

#define AK880X_DEV_ADDR(x)  (AK880X_VA_DEV+(x))

#define AK880X_VA_UART    AK880X_DEV_ADDR(0x6000)
#define AK880X_PA_UART    ((0x6000)+AK880X_PA_DEV)

#define AK880X_VA_L2BUF  ANYKA_VA_MEM
#define AK880X_PA_L2BUF  (0x48000000)
#define AK880X_SZ_L2BUF  SZ_8K


/* USB host controller */
#define AK880X_PA_USBHOST (0x49000000)

/* DMA controller */
#define AK880X_PA_DMA    (0x4B000000)
#define AK880X_SZ_DMA    SZ_1M

/* Clock and Power management */
#define AK880X_PA_CLKPWR  (0x4C000000)

/* LCD controller */
#define AK880X_PA_LCD    (0x4D000000)
#define AK880X_SZ_LCD    SZ_1M

/* NAND flash controller */
#define AK880X_PA_NAND    (0x4E000000)

/* IIC hardware controller */
#define AK880X_PA_IIC    (0x54000000)

/* IIS controller */
#define AK880X_PA_IIS    (0x55000000)

/* RTC */
#define AK880X_PA_RTC    (0x57000000)
#define AK880X_SZ_RTC    SZ_1M

/* ADC */
#define AK880X_PA_ADC    (0x58000000)

/* SPI */
#define AK880X_PA_SPI    (0x59000000)

/* SDI */
#define AK880X_PA_SDI    (0x5A000000)

/* CAMIF */
#define AK880X_PA_CAMIF  (0x4F000000)
#define AK880X_SZ_CAMIF  SZ_1M

/* AC97 */

#define AK880X_PA_AC97    (0x5B000000)
#define AK880X_SZ_AC97    SZ_1M

/* AK880X High-speed SD/MMC */
#define AK880X_PA_HSMMC  (0x4A800000)
#define AK880X_SZ_HSMMC  (256)

/* AK880X memory and IO controls */
#define AK880X_PA_SSMC  (0x4F000000)
#define AK880X_VA_SSMC  ANYKA_ADDR_CPU(0x00000000)

#define AK880X_PA_EBI (0x48800000)
#define AK880X_VA_EBI ANYKA_ADDR_CPU(0x00010000)

/* physical addresses of all the chip-select areas */

#define AK880X_CS0 (0x00000000)
#define AK880X_CS1 (0x08000000)
#define AK880X_CS2 (0x10000000)
#define AK880X_CS3 (0x18000000)
#define AK880X_CS4 (0x20000000)
#define AK880X_CS5 (0x28000000)
#define AK880X_CS6 (0x30000000)
#define AK880X_CS7 (0x38000000)

#define AK880X_SDRAM_PA    (AK880X_CS6)

#define ANYKA_PA_IIC          AK880X_PA_IIC
#define ANYKA_PA_UART    AK880X_PA_UART
#define ANYKA_PA_USBHOST  AK880X_PA_USBHOST
#define ANYKA_PA_HSMMC0    AK880X_PA_HSMMC
#define ANYKA_PA_NAND    AK880X_PA_NAND

#define AK880X_VA_ISA_WORD  (0x02000000)
#define AK880X_VA_ISA_BYTE  (0x03000000)

#endif /* __ASM_ARCH_MAP_H */


The above is Copyright (c) 2003 Simetec Electronics / Ben Dooks

If this is accurate, it should prove useful in further modifying burntool...

TTFN,
Tarkin

nice find. Seems that he tries to use simetec as template.