open mini netbook
Would you like to react to this message? Create an account in a few clicks or log in to continue.
open mini netbook

open project of mini netbook, 7'' ARM netbook


You are not connected. Please login or register

Netbook problemas Fail to init USB BurnTool

5 posters

Go to page : Previous  1, 2

Go down  Message [Page 2 of 2]

Oto


Master
Master

No need to run AKUBHOST. Just run the attached burntool ak88 [You must be registered and logged in to see this link.]

If you used the modified burntool then it is really strange why it inits ok with ak88.txt but not with burntool. scratch

As the last thing you could download and install USBlyzer

Then:
1. Run USBlyzer
2. Choose capture->Capture Hot-plugged
3. Click start capture
4. Then run burntool_ak88.exe
5. Connect the netbook and click "start" in burntool
6. After that switch to USBlyzer, click stop.
7. Save the capture session File->Save As
8. Post/attach the result *.ulz file

That way I could see which value doesn't work.

jciral



Otoluk, This is the result.


[You must be registered and logged in to see this link.]

Oto


Master
Master

Ok, I found the mistake. I had changed the wrong value in SDRAM and not DDR.

Here you go another version, now with DDR RAM settings. Try
[You must be registered and logged in to see this link.]

Just run the burntool_ak88_v2.exe, no need to do anything, just say did or didn't USB-init.

jciral



Siento tener que decir que no funciona.
He vuelto hacer una captura con el nuevo burntool y una imagen del sotware USBlyzer.
------------------------------------------------------------------------------------
I am sorry to say that does not work.
I came back to capture the new image burntool and USBlyzer sotware.
[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this image.]

Oto


Master
Master

Does it still says that "fail to init"? If you do not choose the files it says "unable to download producer"?

Try AKUBHOST these, which works?

Code:
UINT  reg_addr[] = {
0x080000DC,
0x08000004,
0x66668888,
0x66668888,
0x20026000,
0x66668888,
0x66668888,
0x08000064,
0x080000A8,
0x2002D004,
0x66668888,
0x2002D000,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x2002D008};


UINT reg_value[] = {
0x0000100C,
0x00021067,
0x000000C8,
0x000000C8,
0x302002D8,
0x000000C8,
0x000000C8,
0x08000000,
0x04000000,
0x0F706B94,
0x000000C8,
0x40170000,
0x40120400,
0x000000C8,
0x40104000,
0x000000C8,
0x40100123,
0x000000C8,
0x40120400,
0x000000C8,
0x40110000,
0x000000C8,
0x40110000,
0x000000C8,
0x40100023,
0x000000C8,
0x60170000,
0x01037C58};


Code:

UINT  reg_addr[] = {
0x080000DC,
0x08000004,
0x66668888,
0x08000064,
0x080000A8,
0x2002D004,
0x66668888,
0x2002D000,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x66668888,
0x2002D000,
0x2002D008};


UINT reg_value[] = {
0x0000100c,
0x00021067,
0x000000C8,
0x08000000,
0x04000000,
0x0F506B15,
0x000000C8,
0x40170000,
0x40120400,
0x00000001,
0x40104000,
0x00000001,
0x40100123,
0x00000001,
0x40120400,
0x00000001,
0x40110000,
0x00000001,
0x40110000,
0x00000001,
0x40100023,
0x00000001,
0x60170000,
0x00057C58};

jciral



Hello.
Sorry I could not answer before.
I put some pictures.
-------------------------------
Hola.
Siento no haber podido contestar antes.
Pongo unas imágenes.

This shows the files that I set in the burntol.
-------------------------------------------------------------
Esta muestra los archivos que quiero programar en el burntol.

[You must be registered and logged in to see this image.]

These are the txt sent to try to AKUBHOST.
-------------------------------------------------------
Estas son de los txt enviados para probar con AKUBHOST.

[You must be registered and logged in to see this image.]

Follow the error.
-----------------
Sigue el error.

Oto


Master
Master

What happens if you rename C:\ak8801 folder so burntool can't find producer an others files. And then run burntool. I do like this to test if it inits USB.

jciral



Hello Otoluk.
What do you mean, you change the folder burntol?
You can give me an example of how you want to do so.
Greetings.

Oto


Master
Master

I mean copy the produce, nboot, eboot to different folder or rename them so burntool can't find it. By doing this we could check if usb_init is ok because burntool will not try to start burning the files.

jciral



Burntol images with the names changed.
[You must be registered and logged in to see this image.]

jciral



Images with the right producer and the other with different names
You can see that carrying something but ultimately fails.
[You must be registered and logged in to see this image.]

Oto


Master
Master

Yes, I see. Really strange why is that.

jciral



Producer and nboot now correctly named.
[You must be registered and logged in to see this image.]

jciral



Now with producer, nboot, eboot with correct names.
[You must be registered and logged in to see this image.]

Oto


Master
Master

New burntool to try with ak8802 as it has ak98xx boot also - [You must be registered and logged in to see this link.]

Included ROM is not for this netbook but burntool could be usable.

Sponsored content



Back to top  Message [Page 2 of 2]

Go to page : Previous  1, 2

Permissions in this forum:
You cannot reply to topics in this forum